Table of Contents
Advertisement
Important Notice
1. Please store your application programs and data files in the \Micro_SD . Don't store them in the
\System_disk. That is because the \System_Disk is using Nor Flash memory. Its size is small and major
purpose is for storing OS, ISaGRAF driver, some basic utilities and DLL . The Nor Flash memory is not
good for frequently updating files. If update files frequently in the \System_Disk (for example, update
a file every 1 to 5 seconds, then it will be about ten thousand more updates in one day), the data or
files in the \System_disk may crush or lost for some days or months later.
2. ISaGRAF WinCE ViewPAC support only High profile I-8K and I-87K I/O cards in its slot 0 to 2. Please
refer to the accompanying CD-ROM: \napdos\isagraf\vp-25w7-23w7\english-manu\ Datasheet files.
3. Please always set a fixed IP address to the ISaGRAF WinCE ViewPAC. (No DHCP). Recommend to use the
NS-205/208 or RS-405/408 (Ring Switch) Industrial Ethernet Switch for them.
Legal Liability
ICP DAS CO., LTD. assumes no liability for any and all damages that may be incurred by the user as a
consequence of this product. ICP DAS CO., LTD. reserves the right to change this manual at any time
without notice.
ICP DAS CO., LTD. constantly strives to provide our customers with the most reliable and accurate
information possible regarding our products. However, ICP DAS CO., LTD. assumes no responsibility for its
use, or for any infringements of patents or other rights of third parties resulting from its use.
Trademark & Copyright Notice
The names of products and name of company are used for identification purposes only, and are the
registered trademarks of their respective owners or companies.
Development Software
Two options:
- ISaGRAF: Ver. 3.4x (or Ver. 3.5x), IEC61131-3 standard. LD, ST, FBD, SFC, IL & FC or
- Non-ISaGRAF: Microsoft EVC++4.0 or VS.NET 2008/2005/2003 (VB.net, C#.net)
Reference Guide
- ISaGRAF English User's Manual:
VP-25W7/23W7 CD: \napdos\isagraf\vp-25w7-23w7\english-manu\
"user_manual_i_8xx7.pdf" and "user_manual_i_8xx7_appendix.pdf"
- ISaGRAF中文進階使用手冊:
VP-25W7/23W7 CD: \napdos\isagraf\vp-25w7-23w7\chinese-manu\
"chinese_user_manual_i_8xx7.pdf" and "chinese_user_manual_i_8xx7_appendix.pdf"
- More from the Internet:
www.icpdas.com
>
Technical Service
service@icpdas.com.
FAQ :
www.icpdas.com
Writer: Chun Tsai,
Copyright Jul. 2009, by ICP DAS CO., LTD. All Rights Reserved.
2
ISaGRAF WinCE ViewPAC User Manual
Product > Solutions > Soft PLC, ISaGRAF & Soft-GRAF HMI > ISaGRAF
>
Support > FAQ > ISaGRAF Soft-Logic PAC
Last Editor: Eva Li
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
>
Manual
Advertisement
Table of Contents
