ICP DAS USA ISaGRAF WinCE ViewPAC User Manual page 131

Download and run the project
Select [Home] > [Connect] to open "Remote Management" window. In the "Network IP" of "Target
Station", type in the correct IP address of your PAC and click "Connect".
Type in the IP address of PAC.
The "Install system files" button can update ViewPAC 's Indusoft firmware to your
PC's current version. Please make sure all file attribution are not "read only" in the
ViewPAC 's \System_Disk\InduSoft\ path.
If connection is fine, click on the tab of "Project" then click "Download". When download finished, click
"RUN" to start the project.
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
8-11