Table of Contents
Advertisement
About item 1, user may set up to eight IP address for ISaGRAF or other HMI to get access to the ISaGRAF
WinCE ViewPAC via the Modbus TCP/IP protocol as below.
On the I/O connection window of ISaGRAF. Please connect "vip" and entering the IP which can get
access to the ViewPAC via Modbus TCP/IP protocol. If "vip" is not connected, any remote IP can get
access to your ViewPAC via Modbus TCP/IP protocol. If "vip" is connected and No IP is entered (all
assigned as "N/A"), No HMI and ISaGRAF can get access to it anymore.
Please re-compile your ISaGRAF project and download it to the controller if you have modified the IO
connection.
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
5-20
Advertisement
Table of Contents
