ICP DAS USA ISaGRAF WinCE ViewPAC User Manual page 172

2) Click the 4 Points or the 9 Points button.
3) Tap the touch pen in the exact center of each of
the calibration markers (
4) Touch the panel to finish the calibration program
5) Run the View PAC Utility to save the settings and
reboot the View PAC
Ap-12
+ )
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
2) Run the Stylus.
3) Tap the touch pen in the exact center of each of
the calibration markers ( + )