ICP DAS USA ISaGRAF WinCE ViewPAC User Manual page 79

We will use OUT01 to display the state of the first output of the I-87055W board, while "OUT02" is for
controlling and displaying the second output of the I-87055W.
Now please insert one another "Layer14". Inside the "Layer14" please insert one "Layer15" with a "T1 =
xxx ms" symbol. And two empty Layers – "Layer16" & "Layer17" just below the "Layer15". We will use
T1 to display the Timer value "T1" in the ISaGRAF project.
Click on "Save" to save this page.
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Layer14
Layer15
Layer16 Layer17
4-29