Advertisement
1
----------------------------------------------------------------------------------
Software Installation
Step 1: Insert the companion CD into the CD drive.
Step 2: Copy the 7188XC folder from CD:\Napdos\7188XABC\ to the Hard Drive of the
Host PC.
Step 3: Install the MiniOS7 Utility.
Locate and execute the minios7_utility_vXXX.exe file from
CD:\NAPDOS\MINIOS7\UTILITY\MiniOS7_utility\ folder or
http://ftp.icpdas.com/pub/cd/8000cd/napdos/minios7/utility/minios7_utility/
Step 4: Copy the 7188xw.exe file from the CD:\Napdos\MiniOS7\utility\ folder to the PATH
directory, for example C:\Windows\.
After all the software is copied to the Host PC, the content of 7188XC folder should be as
follows:
7188XC
Demo
Demo programs for the I-7188XC(D)
BC_TC
MSC
7188XC_DemoList.htm
Document
OS_image
Readme.html
Note: The 7188xw.exe file is used as a bridge between the I-7188XC(D) and the Host PC.
Therefore, the 7188xw.exe file must be copied to the "C:\Windows\" folder to allow it to be
executed from any location.
2
----------------------------------------------------------------------------------
Connecting the Download Cable to the Host PC
Step 1: Connect the CA0910F download cable between COM1 of the I-7188XC(D) and the
COM Port of the Host PC, as shown in the diagram below.
Step 2: Apply power (Vs+, GND) to the I-7188XC(D). Vs+ can be in a range from +10V to
+30V DC.
Copyright © 2012 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Demo programs for the BC++ and the TC++ compiler
Demo programs for the MSC compiler
Demo list for the I-7188XC(D)
Documents related to the I-7188XC(D)
The MiniOS7 image file matches the demo programs
The detailed description about the 7188XC folder
2
Advertisement
