Table of Contents
Advertisement
Appendix D Enable The Second Ethernet Port Of The
The VP-25W7/23W7/25W6/23W6/4137/4136 default has only one Ethernet port named "LAN1" . User
can add one "I-8135W" card in the slot 0 to expand the 2nd Ethernet port named "8135" . For example,
the ISaGRAF WinCE ViewPAC redundant solution need the 2nd Ethernet port (Please refer to
www.icpdas.com
>
Support > FAQ > ISaGRAF Soft-Logic PAC
To setup the second Ethernet port in the I-8135W, please follow below steps.
1. Power off the ViewPAC, then install the "I-8135W" card to ViewPAC 's slot 0 first.
2. Power on the ViewPAC, then run ViewPAC utility to enable the "8135" as below.
(Please check "Use DHCP ..." first, we will modify it to be a fixed IP address later.) Remember to run
"Save and Reboot" once to save the settings.
VP-2xW7/2xW6/4137/4136
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
> FAQ-093).
Ap-21
Advertisement
Table of Contents
