ICP DAS USA ISaGRAF WinCE ViewPAC User Manual page 49

Click on "Setup" first and then entering the IP address of your controller. The port number should be
502.
To download "vphmi_05" project to the VP-25W7, Click on "Debug". If communication is established,
click on "stop" first to stop the old project running in the VP-25W7.
Then click on "Download" to download it to the controller.
3-5
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS