ICP DAS USA ISaGRAF WinCE ViewPAC User Manual page 9

I-8172W 2-port FRnet Module
I-8K CAN Bus Modules
I-8123W 1 Port High Performance CANopen Master Module
RS-485 Remote I/O Modules: Serial Interface; HOT-SWAP
I-87K High Profile Modules:
I-87K Analog I/O Modules
I-87005W 8-ch. Thermistor input and 8-ch. digital output module
I-87013W 4-ch., 16-bit, 10 Hz (Total), 2/3/4 Wire RTD Input Module with Open Wire Detection
I-87015W 7-ch., 16-bit, 12 Hz (Total), RTD Input Module with Open Wire Detection (for short sensor distance)
7-ch. RTD Input Module with 3-wire RTD lead resistance elimination and with Open Wire Detection (for
I-87015PW
long sensor distance)
8-ch. Differential , 16/12-bit, 10/60 Hz (Total) Analog Input Module with 240 V
I-87017RW
Range of -20 ~ +20 mA Requires Optional External 125 Ω Resistor
I-87017RCW 8-ch. Differential , 16/12-bit, 10/60 Hz(Total) Current Input Module
I-87017W 8-ch. Analog Input Module
I-87017W-A5 8-ch. High Voltage Input Module
I-87017DW 8-ch. Analog Input Module (Gray Cover) (RoHS)
I-87017ZW 10/20-ch. Analog Input Module with High Voltage Protection (RoHS)
I-87018PW 8-ch. Thermocouple Input Module (Gray Cover) (RoHS)
I-87018RW 8-ch. Thermocouple Input Module. Recommend to use the better I-87018Z.
I-87018W 8-ch. Thermocouple Input Module. Recommend to use the better I-87018Z.
10-ch. Differential , 16-bit, 10 Hz (Total), Thermocouple Input Module with 240 V
I-87018ZW Protection, Open Wire Detection, Range of +/-20 mA, 0~20 mA, 4~20 mA requires Optional External 125 Ω
Resistor
I-87019PW 8-ch. Universal Analog Input Module (RoHS) (With a CN-1824 Daughter Board)
8-ch. Diff. , 16-bit, 8 Hz (Total), Universal Analog Input Module with 240 V
I-87019RW
Open Wire Detection (V, mA, Thermocouple; Range of -20 ~ +20 mA need to set Jumper on board)
10-ch. Universal Analog Input Module (Gray Cover) (RoHS), Includes the I-87019ZW Module and a DB-1820
I-87019ZW
Daughter Board
I-87024CW 4-ch. 12-bit channel to channel isolated current output module with open-wire detection
I-87024DW 4-ch. 14-bit analog output module
I-87024RW 4-ch. 14-bit analog output module
I-87024W 4-ch. 14-bit analog output module (0 ~ +5 V, +/-5 V, 0 ~ +10 V, +/-10 V, 0 ~ +20 mA, +4 ~ +20 mA)
I-87028CW 8-ch. 12-bit current output module
I-87H17W 8-ch. analog input module and HART master module.
I-87K Multifunction I/O Modules
I-87026PW 6-ch. Analog Input, 2-ch. Analog Output, 2-ch. Digital Input and 2-ch. Digital Output Module (RoHS)
I-87K Digital I/O Modules
I-87037W 16-ch. source type Isolated Digital Output Module(RoHS)
I-87040W 32-ch. Isolated Digital Input Module
I-87040PW 32-ch. Isolated Digital Input Module with 16-bit Counters (RoHS)
I-87041W 32-ch. Sink Type Open Collector Isolated Digital Output Module
I-87046W 16-ch. Non-Isolated Digital Input Module for Long Distance Measurement
I-87051W 16-ch. Non-Isolated Digital Input Module
I-87052W 8-ch. Differential , Isolated Digital Input Module
I-87053PW 16-ch. Isolated Digital Input Module with 16-bit Counters
I-87053W 16-ch. Isolated Digital Input Module
I-87053W-A5 16-ch. 68 ~ 150 V
I-87053W-AC1 16-ch. AC Isolated Digital Input Module with 16-bit Counters
I-87053W-E5 16-channel 68-150 V
I-87054W Isolated 8-ch. DI and 8-ch. Open Collector DO Module
I-87055W Non-Isolated 8-ch. DI and 8-ch. Open Collector DO Module
More at www.icpdas.com > Product > Solutions > Remote I/O Modules/Units > I-8K & 87K
Isolated Digital Input Module
DC
solated Digital Input Module with 16-bit Counters
DC
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Over Voltage Protection,
rms
Over Voltage
rms
Over Voltage Protection,
rms
9