Click inside this "Layer" and then insert one another layer inside it as below. Please enter "K1" into the
new created "Layer".
First click inside the "Layer2" and then
insert one another layer inside it.
Follow the same former steps to insert one another "Layer" to be in just below the "Layer3" as below.
First Click inside the "Layer2", and
then insert the "Layer4" inside it.
4-26
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Now we have "Layer3" inside
the "Layer2"
Please place "Layer4" just below
the "Layer3"