Table of Contents
Advertisement
TPD/VPD Series HMI Device User Manual
3. Getting Started
This chapter provides a basic overview of how to install, configure and operate TouchPAD device.
3.1 Obtaining/Installing the HMIWorks
Software
First of all, you should install the HMIWorks development software on your PC. HMIWorks is the
development tools for the TouchPAD devices.
The HMIWorks can be obtained from either the companion CD-ROM, the ICP DAS FTP site, or the
ICP DAS web site. The location of the install files on the CD and the download addresses are shown
below:
http://ftp.icpdas.com/pub/cd/touchpad/setup/
1.
Double-click the "HMIWorks_STD_vxxx_setup.exe" file icon to execute the driver
installation program.
2.
Once the driver installation is complete, double-click the
"HMIWorks_STD_vxxx_Update_xx.exe" file icon to execute the driver installation
update program.
Follow the steps as suggested by the HMIWorks setup wizard to finish the installation. For more
detailed information related to the driver installation, refer to
Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved.
CD:\NAPDOS\TouchPAD\Setup\
HMIWorks Software user
manual.
Page: 65
Advertisement
Table of Contents
