Table of Contents
Advertisement
No.
54
Q: iPAC-8xx7 and μPAC-7186EG support Data Logger function.
Q: How to connect I-7018z to get 6 channels of 4 to 20 mA Input and 4 channles of
55
Thermo-couple temperature Input? And also display the value on PC by VB 6.0 program?
56
Q: How to do periodic operation in ISaGRAF PACs?
Q: How to record I-8017H's Ch.1 to Ch.4 voltage Input in a user allocated RAM memory in
the WinCon-8xx7? The sampling time is one record every 0.01 second. The record period
57
is 1 to 10 minutes. Then PC can download this record and display it as a trend curve
diagram by M.S. Excel.
Q: How to record I-8017H's Ch.1 to Ch.4 voltage input in S256 / 512 in I-8437-80 or
I-8837-80? The sampling time is one record every 0.05 second. The record period is 1 to
58
10 minutes. Then PC can download this record and display it as a trend curve diagram by
M.S. Excel.
59
Q: Some skill to operate RS-232/422/485 serial COM Port by COM functions
60
Q: How to read / write file data in WinCon?
Q: How to connect RS-485 Remote I-7000 and I-87K I/O modules in I-8xx7, I-7188EG/XG and
61
WinCon-8xx7 PAC? How to program RS-485 remote I-7017RC, I-87017RC and I-7018Z?
62
Q: How to setup a redundant system with Ethernet I/O?
Q: Why my RS-485 remote I-7000 and I-87K Output module's host watchdog function
63
doesn't work to reset its output channels to safe output value while the RS-485
communication cable is broken?
Q: ICP DAS release Stable and Cost-effective Data Acquisition Auto-Report System. (VC++
65
6.0, VB 6.0 and ISaGRAF demo program are available)
Q: How to process the Integer or Real value coming from the RS-232 / RS-485 device? Like
66
the device of Bar-Code reader or RS-232 weight meter.
Q: How to send email with one attached file by WinCon-8xx7 or iPAC-8447 / 8847 or
67
μPAC-7186EG?
68
Q: Why the W-8xx7 or I-8xx7 or I-7188EG/XG always reset? How to fix it?
69
Q: Why my PC can not run "ftp" to connect W-8347 or W-8747?
70
Q: How to do Time Synchronization and record state of many ISaGRAF PACs?
Q: Application: Record 10-Ch. temperature value into a file in W-8xx7 every minute. When
71
24 hour recording is finished, send this record file by email every day.
Q: Application sample: Record Voltage / Current input by W-8xx7 every 20 ms for 1 to 10
72
minutes. Then send this record file by email.
Q: Why does the I-7017 or I-87017's Current Input reading value become double or
73
incorrect?
74
Q: How to use ISaGRAF new Retain Variable? What is its advantage?
75
Q: Why my ISaGRAF project can not connect Modbus Slave device correctly?
Q: Application sample: Record Voltage / Current input by μPAC-7186EG every second for 1
77
to 10 minutes. Then send this record file by email.
Q: Application: Record 10-Ch. temperature value into a file in μPAC-7186EG every minute.
80
When 24 hour recording is finished, send this record file by email every day.
81
Q: How to measure +/-150VDC in ISaGRAF controllers plus the I-87017W-A5 I/O card?
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
English ISaGRAF Ver.3 FAQ
9-13
Advertisement
Table of Contents
