2.1.2 Important Notice For Window 2000 Users
If you close some ISaGRAF windows, it holds about 20 ~ 40 seconds (No response). This may caused by
the procedure "CTFMON.EXE" of Windows 2000. First click on "Ctrl & Alt & Del" at the same time to stop
the "CTFMON.EXE" process, and then you may create a short cut for the "ISaGRAF project manager".
And then check on "run in separate memory space" option in the shortcut property.
2.1.3 Important Notice for Window NT Users
If your computer is using the Windows NT operating system, you will need to add one line to the "isa.ini"
file in the ISaGRAF Workbench "EXE" subdirectory.
C:\ISAWIN\EXE\isa.ini
You can use any ASCII based text editor (such as Notepad or UltraEdit32) to open the "isa.ini" file.
Locate the [WS001] header in the "isa.ini" initialization file (it should be at the top of the file). Anywhere
within the [WS001] header portion of the "isa.ini" initialization file, add the entry shown below within
the [WS001] header:
[WS001]
NT=1
Isa=C: \ISAWIN
IsaExe=C: \ISAWIN\EXE
Group=Samples
IsaApl=c: \isawin\smp
IsaTmp=C: \ISAWIN\TMP
2-4
2.
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
1.