Table of Contents
Advertisement
6.3
Compiling an Application Program
When you have finished writing a program, you can build an application by the following steps.
1. Remember to save at any time for safety.
2. Then compile (Build) the project. The result is listed in the "Error List" windows at the bottom.
3. You can find the execution file in
<Your VB.net Project folder> \bin\Release\ <project_name>.exe
Please copy this execution file to the ViewPAC 's \System_Disk\ISaGRAF\ path to run it.
Note:
User may copy the VB.NET execution file to other path to run it but there should contain at least three
DLL files with it or it can not run correctly.
For ex, the project1.exe can run in the \Micro_SD\ path if there is three plus one file in it.
The "project1.exe", "QuickerNet.dll", "Quicker.dll" and "Mscorlib.dll". (The "QuickerNet.dll" ,
"Quicker.dll" and "Mscorlib.dll" can be copied from the ViewPAC 's "\System_disk\ISaGRAF\" path)
6-5
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Advertisement
Table of Contents
