Table of Contents
Advertisement
4.4.4 Step 4 – Download Web HMI Pages To The Controller
The steps are similar as listed in
listed in the
Chapter
3, it's better to do it once to get familiar with it.
Set the Web Pptions.
Check on "Enable Web HMI" and then click on "Setting", Please check on "Enable Account Security" and
then click on "Edit" to set (username , password).
Note:
If "Enable Account Security" is not check, any user can easily get access to your ISaGRAF WinCE
ViewPAC through the Internet Explorer.
And then, please copy all files in this example1 to the controller
<your hard drive>:\example1\ *.*
to the ViewPAC 's
Micro_SD\Temp\HTTP\WebHMI\
Since the Web Pages are modified or new copied, please run "rs_wphmi.exe" to reset the Web server.
The "rs_wphmi.exe" must be run every time when user has modified any file in the ViewPAC 's
\Micro_SD\Temp\HTTP\WebHMI\
Section
3.2. If you haven't practiced "Setting Up A Web HMI Demo"
ISaGRAF WinCE ViewPAC User Manual , V.1.6 , 1/2017 by ICP DAS
Then remember to click on "OK".
4-37
Advertisement
Table of Contents
