System Configuration With User Interface; Chapter Overview - Teledyne SeaBat T Series Operator's Manual

SYSTEM CONFIGURATION WITH USER INTERFACE

4 SYSTEM CONFIGURATION WITH USER INTERFACE
4.1

Chapter Overview

With a ROV system, the Sonar UI is used for system configuration and operator control. Refer
to the RESON Sonar UI User Manual (see Appendix E Reference Documentation).
With an AUV system, the Sonar UI is needed for operator control during system setup and test
only. Refer to the RESON Sonar UI User Manual (see Appendix E Reference Documentation).
During AUV system operation, all communication will be between the SSP and the customer-
provided Vehicle Control Computer. The output during operation is a data stream in
accordance with the Data Format Definition document (see appendix E.1 SeaBat T-Series
Subsea Documentation).
This chapter includes instructions of the following subjects (click the emphasized hyperlink to be
taken to the section):
 Sonar User Interface (SUI): Consists of brief instructions on starting the Sonar User
Interface.
 Remote Operation: Consists of instructions on how to control the sonar from a
remote PC.
 Remote Desktop Session: Consists of instructions on how to establish a remote
desktop session.
 Folder Management: Consists of instructions on file sharing and renaming of
computer or workgroup.
For more details on system configuration and user interface navigation, refer to the
RESON Sonar UI User Manual (see Appendix E Reference Documentation).
For information on starting, stopping, and setting up the SeaBat sonar system, see
section 3 System Startup and Shutdown.
For information on the practical use of the sonar, see section 6 Active Sonar Usage.
For information on installation and details on the various system components, see
Appendix B Installation Instructions.
SeaBat T-Series Subsea Operator's Manual
Version 7
NOTE
NOTE
Page 15 January 31, 2019