Teledyne SeaBat T Series Operator's Manual page 100

TROUBLESHOOTING
Message
Lost sync with DMA read
MMF Outbound memory creation ...
Required file: "7k_0.xml" or "7k.xml" Not
found.
Required file: "7k_Bite.htm" Not found.
SET UP: FAILED TO LOAD BIT FILE "<x>"
for Device <x>, Enumerator <x>
Socket initialization failed, error code <x>
SeaBat T-Series Subsea Operator's Manual
Version 7
Description
A general error occurred while
transferring data to the software.
PC resources are inadequate.
A critical startup configuration file was
missing or too many were found.
A critical startup configuration file was
missing or too many were found.
A critical startup configuration file was
missing or too many were found.
Windows has failed to allocate a
network resource.
Page 88
Action
Reboot the system.
Check RAM or virtual memory
resources
Reinstall the software.
Reinstall the software.
Reinstall the software.
Check network permissions and
resources or Reinstall operating
system.
Alarm Type
Data Reading
General System
Startup
General System
Startup
General System
Startup
General System
Startup
General System
Startup
January 31, 2019