Advertisement
Installation
2
Plug in the USB key, and select the
USB in Windows Explorer (if not
automatically opened by the system).
Open the folder Software Installers >
Sonar User Interface Installer.
Double-click the Sonar UI x.x.x.x-
install operator PC.bat file to install or
update the Sonar UI software.
Follow the instructions from the
InstallShield Wizard.
Click Next to begin the installation of
the Sonar UI.
Select your desired setup.
1
Please observe that the (RESON) Sonar UI may be referred to as SeaBat UI in earlier software releases.
Version 3
Sonar UI
SeaBat T-Series - Quick Installation Guide*
Sonar User Interface
The Sonar User Interface software to be run on the
customer-furnished laptop/PC is provided on the USB key
that's delivered with your Teledyne RESON SeaBat
system.
Document Number QG15552 / Part Number 1008951
1
01/06/2017
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Teledyne Sonar UI SeaBat T Series
Summary of Contents for Teledyne Sonar UI SeaBat T Series
- Page 1 SeaBat T-Series - Quick Installation Guide* Sonar User Interface The Sonar User Interface software to be run on the customer-furnished laptop/PC is provided on the USB key that’s delivered with your Teledyne RESON SeaBat system. Installation Plug in the USB key, and select the USB in Windows Explorer (if not automatically opened by the system).
- Page 2 Teledyne RESON reserves the right to change the content of this document without notice. Teledyne RESON makes no warranty of any kind with regard to this material, and shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. © 2013-2017 Teledyne RESON A/S...
Need help?
Do you have a question about the Sonar UI SeaBat T Series and is the answer not in the manual?
Questions and answers