Seabat Cables; Service Level Agreement; Sound Velocity Probe; Table 25: Svp Technical Specifications - Teledyne SeaBat T Series Operator's Manual

SEABAT T-SERIES SUBSEA SYSTEM OPTIONS
F.3

SeaBat Cables

Additional cables in various lengths are available for purchase.
F.4

Service Level Agreement

A Service Level Agreement (SLA) runs for annual terms of 12 months at a time, and covers a
wide range of services as listed here:
 Annual system health check
 Backup system (availability depending
on system)
 Factory refurbishment (preventive
maintenance procedure)
F.5

Sound Velocity Probe

To ensure proper beam steering, the sonar requires the input of the local sound velocity in the
area of the transmitter and receiver arrays. The sound velocity probe (SVP) is used to
continuously report this value to the processor unit.
The unit described below may be purchased from Teledyne RESON as an option, or a SVP of
similar specifications may be supplied by the customer.
Specification
Type
Sound velocity
Sampling rate
Depth
Baud rate
Supply
Power
Housing
Dimensions
Weight
Temperature
For further information, please refer to the appropriate manual.
SeaBat T-Series Subsea Operator's Manual
Version 7

Table 25: SVP Technical Specifications

Value
SVP 70
Range: 1350-1800m/s
Resolution: 0.01m/s
Accuracy: ±0.05m/s (0-50m)
Accuracy: ±0.25m/s (0-6000m)
20Hz and lower, programmable
6000m
2400-115200
9-55VDC
2W
Titanium
Diameter: 44mm (max)
Length: 165mm (excl. connector)
End cap height: 69mm (max)
1.0kg (excl. cable)
-20° to +55°C
Page 136
 Product and software defect repair
services
 Software and firmware updates
 Spare part allowance
 Telephone and email support
January 31, 2019