System Features; Table 1: Seabat T-Series Subsea Feature Pack - Teledyne SeaBat T Series Operator's Manual

INTRODUCTION
1.4

System Features

Feature
Channel normalization
Data logging internal to the SSP
Dual head, full rate (FRDH)
Dual head, standard
FlexMode
Head tilt
Manual gates
Max. 512 beams
Multi-detect
On the fly frequency change
On the fly mode selection
Pipe detection and tracking
Quality filter
Roll stabilization
Sonar User Interface
Selectable beam density
Tracker
Uncertainty output
Variable frequency (for shallow system)
Vari-swath
X-Range (FM)
The Base feature package can be upgraded after installation.
The main features of the SeaBat T-Series Subsea system are summarized below.
 1PPS pulse handling and time stamping: Data time stamping is referenced to an
incoming 1PPS and associated time message.
 Adaptive gating: Three different gate settings are available to assist the bottom detection
process: No Gates, Absolute Gates, and Adaptive Gates, thus minimizing data processing
time. Adaptive gates adapt to the trend of the seafloor and maximize swath performance
by directing the bottom detection algorithm to search for the seafloor where it is most likely
to be found. The result is maximum swath coverage and ultra-clean data.
1 Includes X-Range. The Integrated Dual Head configurations are delivered with FRDH (see Table 2).
2 Includes FlexMode.
SeaBat T-Series Subsea Operator's Manual
Version 7

Table 1: SeaBat T-Series Subsea Feature Pack

1
2
NOTE
Page 3
Base Optional





















January 31, 2019