Hardware Settings - Teledyne SeaBat T Series Operator's Manual

INSTALLATION INSTRUCTIONS
B.5.11 Hardware Settings
The Hardware settings controls the one-time
transmit array and projector settings. These
settings should be set to reflect the initial
installation of your system and should not
require modification unless the physical
installation changes.
For instructions on navigating the user
interface, refer to the RESON Sonar UI User
Manual (see Appendix E Reference
Documentation).
For details on sonar head assembly orientation, see appendix B.5.8 above.
Select as appropriate one of the preset bracket configurations or enter custom values.
 Preset Configurations:
Preset configurations can only be used with Teledyne RESON standard brackets for
receiver and projector(s). If a standard bracket is not used the customer
configuration should be used instead.
 Customer Configuration:
 Head Tilt:
SeaBat T-Series Subsea Operator's Manual
Version 7
o Normal: When the receiver is mounted with the connector to the port side, the
Configuration selection should be Normal.
o Reversed: When the receiver is mounted with the connector to the starboard
side, the Configuration selection should be Reversed (see appendix B.5.8
Sonar Head Assembly Orientation). This option reverses the beams thereby
normalizing the image and the generated data output.
o For nonstandard installations, the XYZ offset of the receiver reference point to
the projector reference point must be defined. For details on reference points,
see appendix B.5.9 above.
Incorrect offset settings could severely affect data quality.
o The Head tilt feature allows the user to normalize the display, gates, and
bottom detect processing to reflect the physical orientation of the sonar head.
For examples on how to use this feature, see section 6.3.4 Head Tilt.
o The angular value is entered in degrees (+ Port up/- Port down) and must be
between -45° and 45° in increments of 0.5°.
Click the Hardware tab to the right in the
user interface to access the Hardware
settings.
NOTE
CAUTION
Page 109 January 31, 2019