Electrical Isolation; Exposure To Sunlight; Safe Disposal Of Waste (Weee Directive) - Teledyne SeaBat T Series Operator's Manual

SAFETY PRECAUTIONS
2.4

Electrical Isolation

Electrical isolation for titanium components may be achieved by using nonconductive bushings,
washers, and isolation plates to insulate them from the mounting brackets. Common nonconductive
materials include Delrin, G-10/FR4 glass fiber sheets, or high-density polyethylene sheets.
If the sonar head is not isolated from the mounting structure, galvanic corrosion will result in
the mounting structure itself.
Contact Teledyne RESON for additional information on schemes for electrical isolation.
2.5

Exposure to Sunlight

Do not allow the projector and receiver arrays to sit in direct sunlight when not in use, but cover
the arrays with a bag. In addition to furthering corrosive effects, continued exposure to ultraviolet
(UV) rays will damage the polyurethane array face.
2.6

Safe Disposal of Waste (WEEE Directive)

The use of the crossed-out dustbin logo indicates that this product is subject to
directive 2012/19/EU, known as the Waste Electrical and Electronic Equipment
Directive. The WEEE Directive specifies that used electric/electronic equipment may
not be treated as household waste, but must be sorted separately for disposal. These
rules concern all your Teledyne RESON products (computer, monitor, transducer,
processor, probe, etc.) and also all accessories (keyboard, mouse, etc.). By ensuring
this product is disposed of correctly, you will help protect the environment.
For more detailed information about the recycling of this product, please contact your local
authority, your household waste disposal service provider, or Teledyne RESON Customer
Support (reson-support@teledyne.com).
SeaBat T-Series Subsea Operator's Manual
Version 7
CAUTION
NOTE
Page 10 January 31, 2019