Warning Messages - Master List In Alphabetical Order - Teledyne SeaBat T Series Operator's Manual

TROUBLESHOOTING
A.5 Warning Messages – Master List in Alphabetical Order
Message
***** (xxx) Dropping out-of-order ping #<x>
7K Bite File cannot be Read
Cannot Open or Create UDP Configuration
file
Cannot Read UDP Configuration file <x>
Error
Disk Level Threshold: X%.
DMA Transfer Timeout. <x> of <x> bytes
received
ERROR : NSD
Failed to start PCI Copier thread
Failed to start PCI Reader thread
SeaBat T-Series Subsea Operator's Manual
Version 7
Description
The data processing chain has been
delayed and stale data has been
discarded.
Software installation is corrupt.
Software installation is corrupt.
Software installation is corrupt.
The hard drive is getting full. One or
more errors have occurred in
conjunction with data recording.
One or more pings have been lost due
to an error on the uplink between the
receiver and the software. The system
is becoming unstable and data transfer
is corrupted on the PCI bus.
An error has occurred in reading of
BITE data. The data buffer has
overflowed.
One or more PCI bus or network
resources have failed to initialize.
One or more PCI bus or network
resources have failed to initialize.
Page 89
Action
Check sonar processor hardware and
resources.
Restore factory defaults. Reinstall
software.
Restore factory defaults. Reinstall
software.
Restore factory defaults. Reinstall
software.
Check user permissions and available
disk space. Check file names and
recording directories
Reboot. Check sonar processor
hardware.
No action needed.
Check user permissions and sonar
processor network hardware.
Check user permissions and sonar
processor network hardware.
Type
Data Processing
Configuration
Configuration
Configuration
Data Recording
Data Processing
BITE Data
Startup
Startup
January 31, 2019