Uart3 Ch.n Interrupt Enable Register; Uart3 Ch.n Carrier Waveform Register - Epson S1C17M12 Technical Manual

11 UART (UART3)

UART3 Ch.n Interrupt Enable Register

Register name Bit
UAnINTE 15–8 –
7
6
5
4
3
2
1
0
Bits 15–7 Reserved
Bit 6 TENDIE
Bit 5 FEIE
Bit 4 PEIE
Bit 3 OEIE
Bit 2 RB2FIE
Bit 1 RB1FIE
Bit 0 TBEIE
These bits enable UART3 interrupts.
1 (R/W): Enable interrupts
0 (R/W): Disable interrupts
The following shows the correspondence between the bit and interrupt:
UAnINTE.TENDIE bit: End-of-transmission interrupt
UAnINTE.FEIE bit:
UAnINTE.PEIE bit:
UAnINTE.OEIE bit:
UAnINTE.RB2FIE bit: Receive buffer two bytes full interrupt
UAnINTE.RB1FIE bit: Receive buffer one byte full interrupt
UAnINTE.TBEIE bit: Transmit buffer empty interrupt

UART3 Ch.n Carrier Waveform Register

Register name Bit
UAnCAWF 15–8 –
7–0 CRPER[7:0]
Bits 15–8 Reserved
Bits 7–0 CRPER[7:0]
These bits set the carrier modulation output frequency. For more information, refer to "Carrier Modu-
lation."
11-14
Bit name Initial
0x00
– 0
TENDIE 0
FEIE 0
PEIE 0
OEIE 0
RB2FIE 0
RB1FIE 0
TBEIE 0
Framing error interrupt
Parity error interrupt
Overrun error interrupt
Bit name Initial
0x00
0x00
Seiko Epson Corporation
Reset R/W
– R –
– R
H0 R/W
H0 R/W
H0 R/W
H0 R/W
H0 R/W
H0 R/W
H0 R/W
Reset R/W
– R –
H0 R/W
S1C17M12/M13 TECHNICAL MANUAL
Remarks
Remarks
(Rev. 1.2)