Obtain Information On A Coordinate (Viewc; Table B-83 Parameters For The Viewc Command - ADIC Scalar Reference Manual

Obtain Information on a Coordinate (viewc)

The viewc command is used to view information for the specified coordinate from the Scalar DLC
database. This function returns the information about only one coordinate per time, but it shows also
'next-coordinate' reference so it can be used to cycle through all available coordinates.
dasadmin viewc coordinate
See below a list and an explanation of the parameters for the viewc command.
Table B-83 Parameters for the Viewc Command
Parameter
coordinate AMU coordinate. The coordinate in AMU format, for example "T001010101".
There can be special cases, when you want to get a first coordinate of some
special type (drives, storages, etc.) - use the following:
T
L
S
D
E
E01
SCSI coordinate. The coordinate in SCSI format (unsigned integer, for example
256 for first drive element). There also can be several special cases, when you
want to get a first coordinate of some special type (drives, storages, etc.)
-1
-2
-3
dasadmin viewc S
LSCIcoordinate
SCSIcoordinate
Volser
Owner
Attr
Media
UseCount
Ctype
Vtype
Locked
CLMcount
AssociatedDevice
NextLSCIcoordinate T301010102
NextSCSIcoordinate 0
B-52
first tower coordinate
linear devices
storage ("T" or "L")
drive
mailbox
first coordinate of I/E logical range E01, etc.
first storage element
first drive element
first insert/eject element
T301010101
0
100001
1
Occupied
3480
7
AMU Dynamic
DEFAULT_L
0
Explanation
Scalar DLC
6-00658-02