ADIC Scalar Reference Manual page 138

Table 5-33 Media Rules
Property/Button Icon
Add
Remove
Apply
Help
Create Media Rule
The pop-up pane allows to create media rule.
Only administrator users can create the media rules. For the user without
NOTE:
administrative privileges, the button is disabled.
Figure 5-30 Media Rule Creation
Enter the volser range. Select the media domain. Specify the media type that should be assigned
to the cartridges in the specified range, if they do have an appropriate media domain. Click OK to
create and apply the media rule. Click Cancel to exit and without creating the media rule.
Apply Media Rule
The pop-up pane allows to apply the existing media rule.
Only administrator users can apply the media rules. For the user without
NOTE:
administrative privileges, the button is disabled.
Figure 5-31 Apply Media Rule
5-46
Operation
Click Add a new media rule. A pop-up window opens, refer to
Create Media Rule on page
Click Remove an existing rule.
Click Apply the selected rule. A pop-up window opens, refer
to Apply Media Rule on page
Click Open online help for the current pane.
Scalar DLC
Description
5-46.
5-46.
6-00658-02