ADIC Scalar Reference Manual page 168

Table 5-55 SCSI Client Properties and Buttons
Property/Button Icon
Priority
Sequence
Number of
reserved storages
Number of
reserved I/E slots
Number of
reserved drives
Unreserve All
Update
Remove
Help
The SCSI Client connection parameters (port-target-LUN) cannot be
CAUTION:
modified. It is only possible to remove the client, or change its name
and the assigned library.
Because of interface properties, only one SCSI Client can be assigned to the
NOTE:
single LUN of the specified SCSI Target.
Only after the client is assigned to the LUN 0 of any target, then all
CAUTION:
other clients assigned to the non-zero LUNs of this target are
activated.
Mode
The SCSI Client Mode pane indicates the SCSI mode parameters.
5-76
Operation
Select Low means the client-sent commands have the lowest
priority in a queue. Refer to
Medium means the client-sent commands have the
standard priority in a queue. Refer to
page 5-97.
High means the client-sent commands have the highest
priority in a queue. Refer to
Don't A commands sent by client without sequence option will
check be executed as they're ready. The system will not wait
until the previous client command is finished.
Supplied The number of storage slots assigned to the client.
Supplied The number of mailbox (I/E) slots assigned to the client.
Supplied The number of drives assigned to the client.
Click De-allocates all slots currently allocated for the client
(storage, I/E, and drives).
Click Save client properties after edit.
Click Remove the client.
Click Open online help for the current pane.
Scalar DLC
Description
Queue Tab on page
Queue Tab on
Queue Tab on page
6-00658-02
5-97.
5-97.