Create Robar Client; Table 5-62 Robar Client Properties And Buttons - ADIC Scalar Reference Manual

Scalar DLC
Table 5-62 ROBAR Client Properties and Buttons (Continued)
Property/Button Icon
Library
Client Host Name
Host alias
Numeric system
Clean pool prefix
Dismount after
clean
Host is allowed to
set the time
Notification
sender name
Priority
Sequence
HCC Major
Number of
reserved storages
Number of
reserved I/E slots
Number of
reserved drives
Unreserve All
Update
Remove
Help

Create ROBAR Client

Under the ROBAR Interface properties, the Add new Client button appears. Clicking it opens a
pop-up client creation pane.
Configuration Tab
Operation
Select The client works with the selected logical library.
Enter The host name of the computer running the client
software (DNS name for the local or remote host,
localhost for the local host, or any for any host)
Enter Host alias (ROBAR format).
Select Numeric system format (decimal/hexadecimal).
Enter Clean pool prefix used by ROBAR client.
Check Indicates whether the cleaning cartridge should be
dismounted after the cleaning ends.
Don't A client host should not be allowed to set the time.
check
Enter Notification sender (ROBAR format).
Select Low means the client-sent commands have the lowest
priority in a queue. Refer to
Medium means the client-sent commands have the
standard priority in a queue. Refer to
page 5-97.
High means the client-sent commands have the highest
priority in a queue. Refer to
Don't Commands sent by client without sequence option will
check be executed as they are ready. The system will not wait
until the previous client command is finished.
Don't Commands send by client without major host parameter
check cannot be addressed/replied via the HCC/MVS
application.
Supplied The number of storage slots assigned to the client.
Supplied The number of mailbox (I/E) slots assigned to the client.
Supplied The number of drives assigned to the client.
Click De-allocates all slots currently allocated for the client
(storage, I/E, and drives).
Click Save client properties after edit.
Click Remove the client.
Click Open online help for the current pane.
Description
Queue Tab on page
Queue Tab on
Queue Tab on page
5-97.
5-97.
5-85