Error Codes; Table 7-3 Scalar Dlc Error Codes - ADIC Scalar Reference Manual

Scalar DLC

Error Codes

Refer to table below for the Error Codes used with the ATAC Calls and Rules Tab.
Table 7-3 Scalar DLC Error Codes
Error Code
0 No error
200 Not Defined
201 Not Defined
202 RPC problem
203 Not Defined
204 Unable to Recover
205 The robot is not ready (or switched off logically)
206 Request link failure
207 Invalid robot number
208 Invalid arguments
209 Invalid client name
210 Invalid request id
211 The request was canceled
212 General software failure
213 Invalid pool name in scr_info
214 The cartridge is in use
215 The accessor couldn't put a cartridge - inventory destination cell
216 The accessor couldn't get a cartridge - inventory source cell
217 General hardware problem
218 Physical problem with cartridge
219 Physical problem with drive
220 Unrecoverable hardware problem - offline the library (not implemented)
221 The accessor couldn't put a cartridge and rejected it to I/E station - inventory
destination cells, update I/E station cells
222 The source cell is empty - update source cell, retry
223 The destination cell is full - update destination cell, retry
224 The door was opened and closed - do a complete inventory, retry
225 The insert/eject station was opened and closed - update I/E station cells, retry
226 Unexpected hardware failure - retry
227 Invalid volser
228 Invalid drive name
229 The drive is in use
230 Scalar DLC is not active
231 Invalid area name
232 The dynamic area became full, insertion stopped
233 The drive is allocated by another client
Error Codes
Description
7-7