ADIC Scalar Reference Manual page 120

Table 5-22 Cartridge Properties and Buttons (Continued)
Property/Button Icon
Owner
Media type
Use count
Update
Help
If the cartridge is not found in the library after the Inventory has been executed, its state changes
to offline. After that, the cartridge is removed from the cartridge list of the Logical library and goes
to archive list, or the list of the offline cartridges. It is shown under the Physical tab and contains the
information about cartridges that were removed from the physical library. Refer to
on page 5-48.
The only method available from the Management GUI to correctly
CAUTION:
identify the cleaning cartridges after Inventory has been completed is
to manually change the desired individual cartridge type from data to
cleaning. Then, if necessary, the acquired cleaning cartridges can be
added into the clean pool.
There is also a foreign cartridges category. These cartridges are either duplicates (another
cartridge with the same name exists in the library), or not readable (the barcode scanner that reads
the volsers cannot scan the name of current cartridge). To operate with the foreign cartridges, their
properties have been extended: the Admin can change the cartridge name (volser) and media type.
The foreign cartridge has a media type that is the default for the slot where it is found after the first
Inventory. The foreign cartridge has a name with a small "u" (for not readable volser), or with a
small "d" (for duplicated volser).
5-28
Operation
Supplied The cartridge owner (client), if any.
Supplied Media type, stable for a normal cartridge.
Select Media type, changeable for a foreign cartridge.
Supplied The number of mounts done (cleanings, for the cleaning
cartridge).
Click Save the cartridge properties after edit.
Click Open online help for the current pane.
Scalar DLC
Description
Offline Cartridge
6-00658-02