ADIC Scalar Reference Manual page 158

Table 5-49 DAS Client Properties and Buttons (Continued)
Property/Button Icon
Supervisor
Check I/E Area
Names
Avoid Media
Identifier
Contention
Requires Drive
Allocation
Priority
Sequence
Wait insert before
mount
Command pause
Drive pause
Number of
reserved storages
Number of
reserved I/E slots
Number of
reserved drives
Update
Remove
Help
If a firewall exists between the client host and the Scalar DLC, the DAS/ACI
NOTE:
firewall PC should be specified under the client host name. Refer to Installation
Guide, Installing DAS Client section.
5-66
Operation
Don't A client without supervisor privileges cannot use drives
check and cartridges that are allocated to another client.
Don't The I/E (mailbox) area names that can be used by the
check client are not limited with the DAS naming standard.
Check Cartridge media identifiers are shown only as a result of
executing a cartridge information operation.
Don't A client does not need to allocate the drive slot before
check executing a mount or dismount.
Select Low means the client-sent commands have the lowest
priority in a queue. Refer to
Medium means the client-sent commands have the
standard priority in a queue. Refer to
page 5-97.
High means the client-sent commands have the highest
priority in a queue. Refer to
Don't A commands sent by client without sequence option will
check be executed as they're ready. The system will not wait
until the previous client command is finished.
Don't A client without wait insert option cannot wait until the
check ejected cartridge will be inserted for the mount could be
executed.
Don't A client without command pause privilege is not
check authorized to execute "pausedas" DAS command.
Don't A client without drive pause privilege is not authorized
check to execute "pausedrive" DAS command.
Supplied The number of storage slots assigned to the client.
Supplied The number of mailbox (I/E) slots assigned to the client.
Supplied The number of drives assigned to the client.
Click Save client properties after edit.
Click Remove the client.
Click Open online help for the current pane.
Scalar DLC
Description
Queue Tab on page
Queue Tab on
Queue Tab on page
6-00658-02
5-97.
5-97.