Figure 5-61 Robar Client Creation - ADIC Scalar Reference Manual

Only the administrator users can create the clients. For the user without
NOTE:
administrative privileges, the create client button is disabled.
It is recommended that the default name be accepted, but it is not required. Be sure that the name
specified manually does not duplicate an existing client name.
Figure 5-61 ROBAR Client Creation
Table below indicates the list of properties displayed in the Properties area of the pane.
Table 5-63 ROBAR Client Creation Properties and Buttons
Property/Button Icon
Name
Library
Client Host Name
Host alias
Numeric system
Clean pool prefix
Dismount after
clean
Host is allowed to
set the time
Notification
sender name
5-86
Operation
Enter The client name. It must not duplicate an existing client
name.
Select The client works with the selected logical library.
Enter The host name of the computer running the client
software (DNS name for the local or remote host,
localhost for the local host, or any for any host).
Enter Host alias (ROBAR format).
Select Numeric system format (decimal/hexadecimal).
Enter Clean pool prefix used by ROBAR client.
Check Indicates whether the cleaning cartridge should be
dismounted after the cleaning ends.
Don't A client host should not be allowed to set the time.
check
Enter Notification sender (ROBAR format).
Scalar DLC
Description
6-00658-02