ADIC Scalar Reference Manual page 174

Figure 5-58 SCSI Client Creation Properties
Table below indicates the list of properties displayed in the Properties area of the pane.
Table 5-60 SCSI Client Creation Properties and Buttons
Property/Button Icon
Name
Library
Port
Target
LUN
Priority
Sequence
Create
Cancel
Help
The new SCSI Client is functional immediately after creation. No supervisor
NOTE:
restart is required.
Because of interface properties, only one SCSI Client can be assigned to the
NOTE:
single LUN.
5-82
Operation
Enter The client name.
Select The client operates with the selected logical library.
Select The client is connected to the SCSI bus via the selected
port.
Select The client is assigned to the selected target.
Select The client is assigned to the selected LUN.
Select Low means the client-sent commands have the lowest
priority in a queue. Refer to
Medium means the client-sent commands have the
standard priority in a queue. Refer to
page 5-97.
High means the client-sent commands have the highest
priority in a queue. Refer to
Don't A commands sent by client without sequence option will
check be executed as they're ready. The system will not wait
until the previous client command is finished.
Click Create client.
Click Cancel creation.
Click Open online help for the current pane.
Scalar DLC
Description
Queue Tab on page
Queue Tab on
Queue Tab on page
6-00658-02
5-97.
5-97.