Figure 5-47 Define Drives - ADIC Scalar Reference Manual

Table 5-50 DAS Client Drives
Property/Button Icon
Down
Force Up
Force Down
Define
Help
The drives defined by the client may represent only the drives that are currently installed and
successfully recognized by the library.
Figure 5-47 Define Drives
With the arrow buttons define the required drive(s) for the current client. Press OK when finish.
Press Cancel to exit without changing the drive defining settings.
The client with no drives defined (empty list) may access all drives in
CAUTION:
the logical library. The client whose drive defining list is not empty
may access only the defined drives.
Volsers
The Volsers pane describes the volser ranges reservation and definition list for the DAS clients
authorised to work with the library.
5-68
Operation
Click De-allocates the selected drive for the client, the drive
should be empty. Has the same effect as the DAS
command "allocd drive DOWN". Refer to DAS
Administration Guide.
Click Allocates the selected drive for the client. Has the same
effect as the DAS command "allocd drive FUP". Refer
to DAS Administration Guide.
Click De-allocates the selected drive for the client. Has the
same effect as the DAS command "allocd drive
FDOWN". Refer to DAS Administration Guide.
Click Open pop-up Define Drive pane. See
Click Open online help for the current pane.
Scalar DLC
Description
Figure
6-00658-02
5-47.