Create Library; Table 5-26 Drive Properties And Buttons - ADIC Scalar Reference Manual

Table 5-26 Drive Properties and Buttons (Continued)
Property/Button Icon
Clean pool
Automatic
cleaning
Max Use
Dismount
management
Delay (ms)
Loops
Owner
Exclusive
reservation
Update
Help
For the slot physical coordinate, refer to
If the DAS interface is being used, the drives are to be named according to the
NOTE:
DAS standards. ADIC recommends using names no more than 9 alphanumeric
characters long and beginning with a letter.

Create Library

Under the Controller properties, the Add new Logical Library button appears. Clicking it opens a
pop-up library creation pane.
Only administrator users can create the libraries. For the user without
NOTE:
administrative privileges, the create library button is disabled.
5-36
Operation
Enter A pool that is used by clean manager to get the cleaning
cartridges.
Enter Allows the drive auto clean manager to be configured. If
checked, the Max Use field is editable.
Supplied Shows how long the drive could be used without
cleaning.
Enter Allows the dismount manager to be configured. If
checked, the Delay and Loops fields are editable.
Supplied A time the drive requires to unload the cartridge.
Supplied Number of retries if the drive does not unload the
cartridge.
Select A slot owner (client). The reserved slot can be used
only by its owner.
None means the slot is not reserved.
Supplied The reservation may be either normal (another owner
can un-reserve the slot) or exclusive (only the owner
can change the reservation).
Click Save the slot properties after edit.
Click Open online help for the current pane.
Element Addressing on page
Scalar DLC
Description
A-7.
6-00658-02