Figure 5-62 Port: Scsi - ADIC Scalar Reference Manual

Scalar DLC
The SCSI ports cannot be configured by means of the Scalar DLC Management
NOTE:
GUI because they are built-in external system objects. The Scalar DLC software
can only use them or indicate that the port is not usable.
The operation of enable/disable the Port is executed by means of the SCSI Target Port Tool. Refer
to SCSI Target Port Tool on page
Figure 5-62 Port: SCSI
Selecting the Port branch displays the list of properties in the Properties area of the pane.
Table 5-65 SCSI Port Properties and Buttons
Property/Button Icon
Port ID
Name
State
Number of targets
Max number of
targets
Configuration Tab
6-8.
Operation
Supplied The port ID.
Supplied The port unique name.
Supplied The port state. Refer to
Supplied The number of targets currently configured for the SCSI
port.
Supplied The maximum number of targets that can be configured
for the SCSI port.
Description
Table 5-64 on page 5-88.
5-89