ADIC Scalar Reference Manual page 106

Table 5-15 Cartridge States (Continued)
Cartridge Command
state status
Reverse Not active
mounted
Ejected Not active
Unloaded Not active
In problem Not active
box
Offline Not active
Being Not active
ejected
Being Not active
inserted
Being Not active
mounted
Being Not active
reverse
mounted
Being moved Not active
Being Not active
dismounted
Being Not active
reverse
dismounted
5-14
Icon
The optical disk is moved to the drive, and its other side is
ready for the read/write operations. The cartridge is not
active until the Dismount is done.
The cartridge is exported into a mailbox slot, and a home
position has been saved. The cartridge is not active for any
operations until the Inventory is finished.
The cartridge is exported into a mailbox slot, and a home
position is lost. The cartridge is not active for any operations
until the Inventory is finished.
The cartridge is moved to a problem box. The cartridge is not
active for any operation and remains not active after the
Inventory. Operator can only physically remove this
cartridge from the library (a home position will be lost then).
The cartridge is removed from the library. The cartridge was
not found after the Inventory has been executed.
The cartridge is moving into a mailbox slot. No commands
are accepted. Temporary state.
The cartridge is moving from the mailbox slot. No commands
are accepted. Temporary state.
The cartridge is moving to a drive slot. No commands are
accepted. Temporary state.
The optical disk is moving to a drive slot. After the operation
is executed, the cartridge will be reverse mounted. No
commands are accepted. Temporary state.
The cartridge is moving to another slot (low-level command
is being executed). No commands are accepted. Temporary
state.
The cartridge is moving from the drive slot. No commands
are accepted. Temporary state.
The optical disk is moving from a drive slot. The cartridge
was reverse mounted. No commands are accepted.
Temporary state.
Scalar DLC
Description
6-00658-02