Figure 5-67 Scsi Lun Creation - ADIC Scalar Reference Manual

Figure 5-67 SCSI LUN Creation
Table below indicates the list of properties displayed in the Properties area of the pane.
Table 5-69 SCSI LUN Creation Properties and Buttons
Property/Button Icon
LUN ID
Name
LUN Number
Vendor ID
Product ID
Firmware
Revision
Full Firmware
Revision
Create
Cancel
Help
The LUN creation is not possible if the target already contains the
CAUTION:
maximum number of LUNs.
The newly created LUN will not be active until there is a SCSI client assigned to
NOTE:
this LUN.
Moreover, the LUN requires the target to be active, and the target becomes
active only when the SCSI client is assigned to the LUN 0.
5-96
Operation
Supplied LUN ID (internal).
Enter LUN name. Contains 'LUN' + LUN Number.
Enter The LUN SCSI ID (external, seen by SCSI initiator).
Select Vendor ID, as will be seen by the SCSI Initiator.
Select Product ID. The format of the data transferred from/to
the SCSI initiator:
Enter The firmware revision level, short form.
Enter The firmware revision level, complete.
Click Create SCSI LUN
Click Cancel creation.
Click Open online help for the current pane.
Scalar DLC
Description
6-00658-02