Problem Report Tool; Figure 6-11 Cluster Configuration Utility: Configuration Complete; Figure 6-12 Problem Report Tool - ADIC Scalar Reference Manual

Scalar DLC
Figure 6-11 Cluster Configuration Utility: configuration complete
The Remove SDLC Cluster Configuration button should be used ONLY to re-configure Scalar
DLC software from cluster to basic (non-cluster) mode. If this is executed on a cluster, the Scalar
DLC failover solution will not function. However, the Scalar DLC itself will work in a basic mode (as
if it has been installed on standalone PC).

Problem Report Tool

To start the Report Tool a shortcut: Start > Programs > ADIC Distributed Library Controller >
Scalar DLC Problem Report Tool.
Figure 6-12 Problem Report Tool
Describe the problem step-by-step. Clarify what has been expected and what should be done to
reproduce the problem. Then press Create Report to save the report file on disk; the report file will
include the entered description, the system register, and so forth.
After the report file is saved, it can be sent to the ADIC customer support via email.
6-11