Setting The Password - KEB COMBIVERT F5 Operation Manual

Programming Menu
3.6.2. Setting the
Password
58
The LCD keypad has different access levels that are password protected.
Different levels provide access to more parameters and give the read and
write privileges.
If you expect to see more parameters or need higher access to change
parameters, please contact KEB.
A user can change the password by:
• Parameter OS01 at Home > Prog > Operator System > OS01
• Home > Prog (F3) > Pass (F2)
The following passwords are used to gain access levels:
User Access Level Password
KEB
OEM
Adjuster
User
Basic
i
The password must be entered with the NUM method of adjustment
described in Section 3.7.1.
From the OEM level, parameters can be hidden in the Adjust, User, and
Basic access levels (ie. unused or OEM specific settings). Refer to Section
3.11 for additional information.
R/W
R/W 479
R/W 119
R/W 27
Read only 11
Typical Access*
All background parameters
Control Type
Motor Type
Input/Output Functions
Advanced motor, speed, & control
parameters
Basic Level with Write privileges
Diagnostics, Fault Logs