KEB COMBIVERT F5 Operation Manual page 31

Housing Size R
Note always verify input voltage with name plate for proper connection
L1
L1, L2, L3
3 phase supply voltage
+PA, - DC supply connection
+PA, PB
Connection for braking resistor
Terminal Tightening Torque:
Housing Size U
Note always verify input voltage with name plate for proper connection
L1, L2, L3
3 phase supply voltage
+PA, - DC supply connection
+PA, PB
Connection for braking resistor
Terminal Tightening Torque:
Housing Size W - Refer to power stage manual, Material Number 00F50EB-KW00
Power Circuit Terminal Summary

Verify input voltage with name plate for proper connection 230V or 480V
L2 L3 +PA
housings size <= 22: 53 inlb (6Nm)
housings size 23/24: 133inlbs (15Nm)
Ground nut on R housing: 89inlbs (10Nm)

Verify input voltage with name plate for proper connection 230V or 480V
K1 K2
+PA
L1 L2 L3
U housings size 23/24: 133inlbs (15Nm)
U housings sizes > 24: 221inlbs (25Nm)
Ground nut on U housing: 89inlbs (10Nm)
K1 K2 T1 T2
- PB U V
T1, T2
Connection for temperature sensor
K1,K2 Brake transistor monitor terminals
U, V, W
Motor connection
Connection for earth ground M8 stud.
Note: Ground Stud and Nut shall be connected with UL
Listed Ring Connectors (ZMVV), rated suitable.
T1 T2
- PB
U V
T1, T2
Connection for temperature sensor
K1,K2 Brake transistor monitor terminals
U, V, W
Motor connection
Connection for earth ground M8 stud.
Note: Ground Stud and Nut shall be connected with UL
Listed Ring Connectors (ZMVV), rated suitable.
W
W
31