Table of Contents
Advertisement
Y35 HD v3
User Manual & Install Guide
7 Special Topics
7.1 Setting Up an IP Camera
In contrast to setting up analog cameras, which just involves wiring up the camera to the appropriate
channel input on the device, there is an extra step required for an IP Camera. After being connected
physically, the IP Camera need to be configured in the system with the appropriate settings and IP
address before it will work.
In the Y35 HD v3 though, adding a new IP camera to the system can easily be done through the
automated setup options available in the setup menu.
7.1.1 Adding an IP Camera
The steps below provide a quick guide to adding a new IP Camera to the system manually.
For a detailed discussion on the configuration options available, please refer to
Step
Navigate to:
7.1.1.1
Enable the channel that you wish to set up the new IP Camera on, by selecting the
checkbox next to the channel number.
Click on the ( ) icon which is on the same row as channel 5 to add the new IP Camera.
Step 7.1.1.2
Your new IP Camera's IP address will now be added to the list on the channel which you had
previously selected when you performed the search. Ensure the Enable checkbox next to the channel
is selected.
Main Menu
Setup
→
→
Surveillance
IPC Setup
→
Section
6.4.3.
137 of 156
Advertisement
Table of Contents
