Y35 HD v3
User Manual & Install Guide
LED
PWR
USB
ALM
REC
ERR
NET
A. GPS Antenna In: This is the connection point for the external GPS antenna.
▪
B. Analog and Analog HD camera connectors.
▪
C. Serial/Sensor Cable (CAB000376) connection.
▪
D. A/V Out port. Use CAB000390 / CAB000298
▪
NOTE: Only used at setup.
E. IP Camera / LAN connector.
▪
F. Power In: This is the power input port for the device.
▪
Illuminated blue indicates the device is powered.
Illuminated green indicates that the device is connected.
Illuminated red indicates that a sensor has triggered an alarm.
Illuminated green indicates that the device is recording.
Illuminated orange indicates for hardware error.
Illuminated green indicates network connection is available.
(Note: The LAN LED status light is currently not supported)
This is the back panel of the Y35 HD v3
Figure 2-3 Rear View of the Y35 HD v3
Description
10 of 156