Orientation of Original Document
Orientation of the original must be specified to to use the following functions.
•
•
•
•
•
•
•
•
•
•
•
Placing originals on the platen
Placing originals in the optional document processor
NOTE: The default setting for the original orientation may be changed. For further details, refer to
Orientation of Original Document on page 7-20.
Follow the steps as below to specify the original orientation.
1
Place the original.
2
Press [Function] and then press [
3
Press [Orig. Set Direction].
Duplex Mode
Split Mode (separate copies from two-sided originals)
Margin Mode
Auto Center
Border Erase
Combine Mode
Memo Pages
Page Numbering
Booklet
Stapling (optional feature)
Punching (optional feature)
Original
Original
[Top Edge]
([Back Edge])
[Top Edge]
([Back Edge])
Down].
Copy Functions
[Left Top Edge]
([Left top corner])
[Left Top Edge]
([Left top corner])
1-7