Assembly; Assembling The Breathing System - Dräger Julian Operating Instructions Manual

Care

Assembly

Assembly

Assembling the Breathing System

1 Place the bottom section on a flat surface.
2 Fit valve plate on top of the bottom section.
3 Insert both valve discs.
4 Tightly fit cover.
5 Tighten all five sealing screws a quarter-turn.
6 Hang breathing system into the slide-out module.
Installing the flow sensor
7 Insert flow sensor into receptacle orienting the electric
connector socket to fit into the slot.
8 Push expiratory port onto sensor with the nose of the
port in the receptacle slot.
Tighten knurled nut by hand.
116
5
5
5
5 5
5
3
3
1
6
7
8
4
2