Configuring Waveforms (Traces) - Dräger Julian Operating Instructions Manual

Configuring in Standby Mode
Setting Default Values

Configuring Waveforms (Traces)

Three standard waveforms can be configured for
each of the ventilation modes: MAN/SPONT, CMV
and PCV.
Turn dial knob to select the line »curves«,
press to confirm.
The selection menu appears in the left-hand field.
Display (example):
Select desired ventilation mode with dial knob:
»Default curves CMV« has been selected in the
example:
Currently selected parameters appear in the left-hand
field, followed by the selection menu for selectable
waveforms.
To replace a parameter:
Select the respective parameter in the selection menu
with dial knob, press to confirm. The parameter
appears against a white background (inversed).
The cursor jumps to the
menu.
Select and confirm position of the new parameter with
dial knob.
NOTE: The corresponding position remains unused if
»blank« is selected.
98
z z z z
symbol of the positioning
Standby / Configuration
MAC-config. calibration
default curves Man./Spont.
default curves CMV
default curves PCV
Configuration Menu for Screen Displays
Standby / Configuration
MAC-config. calibration
default curves IPPV
CO CO Pleth
2
2
PAW
O
2
Flow
Pressures AGas
Flow Volumeter
Volumeter
FG/volu FG/press
blank
To select curve position: turn and confirm .
defaults
pls. tone 0 1 2 3 4 5 6 7 8 9
alarm sound 1 2 3 4 5 6 7 8 9
adult child
scale
parameter
record
interface
alarm limits
curves
basic configurations
CMV settings
PCV settings
Fresh Gas Flow Control
defaults
pls. tone 0 1 2 3 4 5 6 7 8 9
alarm sound 1 2 3 4 5 6 7 8 9
adult child
scale
parameter
record
interface
alarm limits
curves
basic configurations
CMV settings
PCV settings
Fresh Gas Flow Control