Table of Contents
Advertisement
9. You can exit the "Record Live Data Mode" at any time by pressing
and holding the ENTER/LD
Menu" displays.
If desired, you can transfer the recorded Live Data information
to a personal computer using the optional PC-LINK program
(see instructions included with PC-Link for more information).
Important Information
1. When Live Data capture is complete, the green, yellow and red LEDs
on the CanOBD2&1 Scan Tool will flash four times to indicate that
Live Data is being saved to the CanOBD2&1 Scan Tool's memory.
2. When you are LINKED to a vehicle and you are in the "Live Data
View mode", you can toggle between "Live Data View" mode and
"DTC view" mode by alternately pressing and releasing the DTC
SCROLL
Scan Tool will stay linked to the vehicle's computer during this
process. However, if the DTC SCROLL
the DTC screen will be advanced to the next DTC screen and the
CanOBD2&1 Scan Tool will be taken out of link.
LIVE DATA PLAYBACK
Once Live Data has been recorded, it is saved in the CanOBD2&1 Scan
Tool's memory. You can view recorded Live Data immediately after
recording by selecting Yes from the Record Live Data confirmation
screen (see RECORDING (CAPTURING) LIVE DATA on page 49 for
more information), or you can view it later using the "Playback" function.
1. If the Code Reader is connected to a vehicle:
With the CanOBD1&1 Scan Tool in
"Live Data" mode (see VIEWING
LIVE DATA on page 47 for details),
press and hold the ENTER/LD
button until the "Mode Selection
Menu" appears.
Use the UP
buttons, as necessary, to highlight
Live Data Menu, then press the
ENTER/LD
Data Menu" displays.
Use the UP
buttons, as necessary, to highlight
Playback Live Data, then press the
ENTER/LD
CanOBD2&1
OBD2 Live Data Mode
or the ENTER/LD
and DOWN
button. The "Live
and DOWN
button.
LIVE DATA PLAYBACK
button until the "Mode Selection
buttons. The CanOBD2&1
button is pressed twice
53
Advertisement
Table of Contents
