CanOBD2&1 Scan Tool Controls
VIEWING DTCs IN THE CANOBD2&1 SCAN TOOL'S MEMORY
2. Press the ENTER/LD
The "Select OBD System" screen
displays.
3. Use the
and select your vehicle's OBD system
(OBD1 or OBD2). Press the ENTER/LD
button to continue.
Select "Back" if you wish to return to
the Main Menu.
4. If DTCs are present in the CanOBD2&1
Scan Tool's memory, the first stored
DTC will display on the screen.
If more than one DTC is present,
use the DTC SCROLL
scroll through the DTC's.
5. For OBD2 systems only - Freeze
Frame Data (if available) will display
after DTC #1.
6. If no DTCs are in the CanOBD2&1 Scan
Tool's memory, a "No DTC's are
presently stored in the Code Readers
memory" message displays.
14
button.
and
keys to highlight
button to
CanOBD2&1