Innova CanOBD2&1 Owner's Manual page 30

OBD2 Systems
CODE RETRIEVAL PROCEDURE
Red LED – Indicates there is a
problem with one or more of the
vehicle's systems. The red LED is
also used to indicate that DTC(s)
are present
CanOBD2&1 Scan Tool's screen).
In this
Indicator (Check Engine) lamp on
the vehicle's instrument panel will
be illuminated.
DTC's that start with "P0", "P2" and
some "P3" are considered Generic
(Universal).
definitions are the same on all
OBD2
CanOBD2&1
automatically
definitions for Generic DTC's.
If the Generic definition for the
currently displayed code is not
available, an advisory message
shows on the CanOBD2&1 Scan
Tool's display.
DTC's that start with "P1" and some
"P3" are Manufacturer specific codes
and their code definitions vary with
each vehicle manufacturer. When a
Manufacturer
retrieved, the LCD display shows a
list of vehicle manufacturers. Use the
UP
necessary, to highlight the appropri-
ate manufacturer, then press the
ENTER/LD
correct code definition for your vehicle.
If the manufacturer for your vehicle is not listed, use the UP
and DOWN
manufacturer and press the ENTER/LD
additional DTC information.
If
definition
displayed code is not available, an
advisory message shows on the
CanOBD2&1 Scan Tool's display.
10. If more than one code was retrieved press the DTC SCROLL
button, as necessary, to display additional codes one at a time.
28
(displayed
case, the
All Generic
equipped vehicles.
Scan
displays
specific
and DOWN
button to display the
buttons, as necessary, to select Other
the Manufacturer
for the
on the
Malfunction
DTC
The
Tool
the code
DTC is
buttons, as
Specific
currently
button for
CanOBD2&1