Table of Contents
Advertisement
About the CanOBD2&1 Scan Tool
ADJUSTMENTS/SETTINGS AND DTC LIBRARY
Adjustments and settings can be made only when the
CanOBD2&1 Scan Tool is NOT connected to a vehicle.
To enter the MENU Mode:
1. With the CanOBD2&1 Scan Tool OFF,
press and hold the UP
press and release the POWER/LINK
button.
The Setup Menu displays.
2. Release the UP
DO NOT release the UP
visible on the display.
3. Make adjustments and settings as described in the following
paragraphs.
Adjusting Display Brightness
1. Use the UP
as
necessary,
Brightness in the Setup Menu, then
press the ENTER/LD
The
displays.
The Brightness field shows the current
brightness setting, from 0 to 43.
2. Press the UP
brightness of the display (make the
display darker).
3. Press the DOWN
the brightness of the display (make the
display lighter).
4. When the desired brightness is obtained, press the ENTER/LD
button to save your changes and return to the Setup Menu.
Using the Backlight
1. Use the UP
as necessary, to highlight Display
Backlight in the Setup Menu, then
press the ENTER/LD
The Display Backlight screen dis-
plays.
6
button, then
button.
and DOWN
to
highlight
button.
Adjust
Brightness
button to decrease the
button to increase
and DOWN
button.
button until the Setup Menu is
buttons,
Adjust
screen
buttons,
CanOBD2&1
Advertisement
Table of Contents
